SIMONSWERK ANSELMI AN 170 3D Concealed Hinge
AN1703D018
Fully concealed hinge for unrebated residential doors to 60.0 kg [132.0 lbs] on two hinges, minimum panel thickness 33.0 mm [1.299"].
TECTUS is SIMONSWERK’s concealed hinge system. Published load values, routing dimensions and article numbers are issued by SIMONSWERK and govern preparation and hinge count. SIMONSWERK model number AN 170 3D.
Function Options
Single-action doors, unrebated. Opening angle 180°. 13 factory finishes are published by SIMONSWERK; availability varies by market.
When to Specify
Specify the AN 170 3D where a flush door must show no hardware on either face and reveals must be adjusted after hanging. Suited to residential openings within the published load and thickness limits.
Configuration Note
Sold individually, not as a pair. SIMONSWERK supplies this model in packs of two. Load capacity is stated for two hinges on a 900 x 2100 mm leaf. Heavier or taller leaves require additional hinges. At an opening position of 180 degrees the door may require additional fixing. Confirm frame type, panel thickness and finish code before ordering.
Product Note
Stocked at our Calgary location in most finishes and shipped on receipt of order. Where a finish is not in stock it is brought in specifically for your project. Contact Banbury Lane to confirm stock before committing quantities to a door schedule.
Product Details
▸ Dimensions
| Overall Length | 110.0 mm [4.331"] |
| Width (Frame Part) | 24.0 mm [0.945"] |
| Width (Door Part) | 24.0 mm [0.945"] |
▸ Performance
| Load Capacity | 60.0 kg [132.0 lbs] with two hinges on a 900 x 2100 mm leaf |
| Door Weight Range | 20 - 40 kg, 41 - 60 kg |
| Minimum Door Panel Thickness | 33.0 mm [1.299"] |
| Opening Angle | 180° |
▸ Three-Dimensional Adjustment
| Lateral | plus or minus 1.5 mm |
| Vertical | plus or minus 2.5 mm |
| Compression | plus or minus 1.0 mm |
▸ Installation
| Door Leaf | timber |
| Rebate | unrebated |
| Opening Type | single-action door |
| Frame Types | aluminium frame, blind frame, block frame, casing frame |
| Cutter Diameter | 16.0 mm |
| Collar Ring Diameter | 27.0 mm |
| Bearing | maintenance-free slide bearings |
| Frame Screws | Countersunk head screws DIN 7505 A, Diameter 4.5 mm |
| Door Screws | Pan head screws DIN 7505 B, Diameter 4.5 mm |
| Alternative Routing | a cutter diameter of 14.0 mm and a collar ring diameter of 25.0 mm |
▸ Material
| Hinge Body | zamak |
The ANSELMI AN 170 3D is a fully concealed three-dimensional hinge for unrebated residential doors. With two hinges on a 900 x 2100 mm leaf it carries 60.0 kg [132.0 lbs], and it requires a door panel of at least 33.0 mm [1.299"].
Nothing is visible on either face with the door closed or open. The hinge body is closed on the sides, so the mortise reads cleanly where the pocket meets the edge of the leaf.
Lateral, vertical and compression adjustment are all continuous and are made after the door is hung, which allows reveals to be trued up on site. Slide bearings are maintenance-free.
Suits timber and steel leaves in aluminium, blind, block, casing and steel frames. Opening angle is 180°.